氣液增壓泵常見故障排查

氣液增壓泵常見故障排查：

The gas-liquid booster pump common troubleshooting:

一、發現泵漏水時，立即停機檢查防止內漏，如果與電機連接部漏水應更換機械密封。

A, found that the pump Water Leakage, immediately stop check to prevent leakage, if connected with the motor part Water Leakage should replace mechanical seal.

1檢查電源是否接通。 2.使用電源電壓是否與泵的工作電壓相符。

1 check if the power supply is switched on. 2 the use of the power supply voltage is consistent with the working voltage of the pump.

二、泵抽不上水時

Two, pump without water

1.當泵用在抽吸井水時，請檢查：

1 when the pump used in pumping wells, please check:

2進水管路是否漏氣

2 water inlet pipeline leakage

3泵腔內蓄水不夠，應灌滿水

3 pump cavity storage is not enough, should be filled with water

4.吸程是否過高，適當調整

4 suction is too high, appropriate adjustments

---

當前位置： 首頁 >> 公司動態 >> 行業資訊 發布時間： 2014-08-11
上一篇： 氣體增壓泵講解煤氣增壓泵的特點 下一篇： 如何選擇氣體增壓泵