增壓缸的故障處理方法
早期增壓缸技術源于德國，重要技術是防補油過滿裝置消除了增壓缸的補油問題。增壓缸內的卡環限制了儲油活塞移動，當增壓缸加油過滿，多余的油會從減壓閥排放出去。達到設定壓力或保壓一段時間后，增壓器不停檢查增壓器控制氣路是否泄漏，主要檢查撞針、換向閥閥芯的密封。Early pressure cylinder technology from Germany, technology is the important oil filled device eliminates the problem of filling oil pressure cylinder. Storage in pressurized cylinder, ring limits the piston to move, when the pressure cylinder gas through the full, extra oil discharge from the relief valve. Reach the set pressure or pressure after a period of time, the supercharger constantly check whether supercharger control pneumatic leak, mainly check the firing pin, reversing valve seal of valve core.檢查
氣液增壓泵http://www.rizhaowx.com/增壓器出口單向閥的密封是否損壞、磨損、老化。檢查高壓液密封件是否受損。增壓器（泵）不上壓，進口單向閥密封泄漏。高壓密封件受損，此種情況液體將從消音器中噴出。增壓器（泵）不保壓，檢查出口單向閥的密封件是否損壞。增壓器動作緩慢，檢查增壓器的驅動氣路是否受阻。Check the gas and liquid booster pump supercharger outlet check valve seal is damaged, wear and aging. Check whether the high pressure fluid seal is damaged. The supercharger (pump) pressure, import valve seal leakage. High pressure seal is damaged, this liquid will be spewing from the silencer. Supercharger (pump) is not pressure, check the outlet check valve seal is damaged. The supercharger slow, check whether the supercharger driven by pneumatic is blocked.檢查
氣液增壓泵增壓器的控制氣路是否受阻。檢查增壓器的撞針孔是否受阻，或變形。檢查增壓器驅動活塞的密封件是否漏氣、磨損、老化。Check the control pneumatic gas-liquid booster pump supercharger is blocked. Check the supercharger pinhole is blocked, or deformation. Check whether supercharger driven piston seal leakage, wear and aging.
當前位置：
首頁 >>
公司動態 >>
行業資訊
發布時間：
2014-08-20
上一篇：
怎樣換更氣體增壓泵液壓油
下一篇：
氣體增壓泵設備的特點