氣體增壓泵增壓多種氣體介質
氣體增壓泵特點Gas booster pump characteristics1.可以增壓大部分氣體，包括各種腐蝕性氣體(內部核心是不銹鋼材質)，壓力測試范圍大從幾公斤到900公斤可以無級別限制調節氣體壓力，只需要通過控制低端氣體壓力便可以實現高端氣體壓力的調節控制。1. To most gas pressurization, including all kinds of corrosive gas (internal core is stainless steel material), the pressure testing range from a few kg to 900 kg can adjust the gas pressure level constraints, need only by controlling the low gas pressure can achieve high gas pressure regulation control.2.
氣體增壓泵http://www.rizhaowx.com/運轉聲音低，只需要2公斤--8公斤壓縮氣體即可驅動，無需任何電源，對于易燃易爆氣體安全性系數高。2. Gas booster pump running voice low, only need 2 kg - 8 kg can be compressed gas drive, without any power supply, for flammable and explosive gas safety coefficient is high.3.在外部溫度低于+5°c時，調節吸入空氣溫度，也就是冷空氣溫度3. When the outside temperature is lower than + 5 ° c, adjust the intake air temperature, air temperature4.設備可擴展性強，可以選擇電腦控制，plc控制，手動控制，并可以隨時的顯示出壓力數值，壓力數值的顯示可以自由選擇，包括壓力表，數顯壓力表，電腦顯示曲線等。4. Equipment strong scalability, can choose the computer control, PLC control, manual control, and can show the pressure value, pressure numerical display are free to choose, including pressure gauge, pressure gauge display, computer display curve and so on.5. 設備重量輕，體積小，攜帶方便，可以隨意移動。重量為35Kg左右。5. Equipment, light weight, small volume, easy to carry and can move at will. The weight of 35 kg.6.使用簡單，只需要選擇軟管便可以方便的使用。配備有氣體凈化系統，可以方便的過濾干燥氣體。6. Simple to use, only need to select the hose can be convenient to use. Equipped with gas purification system, easy to filter and dry gas.在
氣體增壓泵的氣驅部分該系列需用潤滑型氣體，以便讓密封和其他內部零件得到潤滑，該系列泵的驅動活塞直徑為160mm.In gas booster pump gas drive part of the series need lubrication type gas, so that the lubrication, sealing and other internal parts of this series of pump to drive the piston diameter is 160 mm.
當前位置：
首頁 >>
公司動態 >>
行業資訊
發布時間：
2014-08-27
上一篇：
氣體增壓泵散熱軟管需要脈沖實驗臺的檢測幫助
下一篇：
氣體增壓泵增壓系統典型應用