爆破試驗臺的技術參數及控制功能
爆破試驗臺是對熱塑性管材、復合管材及其他壓力容器進行極限爆破壓力的破壞性試驗，主要是考核其極限壓力強度跟破壞形式。并且模擬特定的外部環境，諸如介質加熱到一定溫度，環境設定到特定溫度，或者降溫冷卻到特定溫度。
Blasting test is destructive test of blasting pressure limit of thermoplastic pipe, composite pipe and other pressure vessels, mainly is the examination of its ultimate pressure intensity with the destruction of the form. And the simulation specific external environment, such as the medium is heated to a certain temperature, the environment is set to a specific temperature, and cooling to a specific temperature.
爆破試驗臺應用范圍：硬管及硬管接頭、熱塑性管材、復合管材（如PP—R、PP—B、PP—A、PE、PE—X、PVC、PVC—U、PVC—C及鋁塑復合管等各種管材），汽車軟管類： 轉向管、剎車管、 空調管、燃油管、冷卻水管、散熱軟管、暖風軟管、空氣濾芯器軟管、渦輪增壓系統軟管、工程液壓軟管；航空軟管和管匯；其他硬管或接頭以及汽車剎車泵、散熱器、油冷器、缸體；工程液壓軟管主要用于液壓設備、工程機械、礦山機械等液壓管爆破試驗；閥體，缸筒等需要檢測壓力的設備的耐壓、爆破試驗。
Scope of application: blasting test tube and pipe joints, thermoplastic pipe, composite pipe (such as PP, R, PP, B, PP, A, PE, PE, X, PVC, PVC - U, PVC - C and aluminum-plastic composite pipe and other pipe), car hose type: the steering tube brake hose, air conditioning, pipe, the fuel pipe, cooling water pipe, radiator hose, air hose, air filter hose, hose, turbocharging system engineering hydraulic hose; air hose and pipe; the other pipe or fittings and automobile brake pump, radiator, oil cooler, cylinder; hydraulic hose is mainly used in hydraulic engineering equipment, engineering machinery, mining machinery, hydraulic pipe blasting test; valve, pressure, blasting test cylinder pressure detection equipment needs.
爆破試驗臺的技術參數：
Technical parameters of blasting test bench:
試驗介質：水、油、或者其他液體 ；
Test medium: water, oil, or other liquid;
環境、介質溫度： -50～250℃任意設定；
Environment, the medium temperature: -50 ℃ ~ 250 ℃ arbitrarily set;
驅動壓力：0~1.2MPa；0~10 MPa；
The driving pressure: 0~1.2MPa; 0~10 MPa;
適用管路通徑:3~200mm；
Application of pipe diameter: 3~200mm;
輸出壓力：最高輸出壓力可達700MPa(根據需要可以選擇任意壓力檔)；
The output pressure: the maximum output pressure can reach 700MPa (according to need can choose any pressure profile);
控制方式和數據記錄方式：
Control method and the method of data record:
手動控制，帶記憶指針表、峰值儀表或者二次儀表記錄配微型打印機；
Manual control, with memory pointer table, peak meter or two meter record with a miniature printer;
單片機或PLC控制，二次儀表記錄具有泄漏報警功能，配微型打印機；
Single chip microcomputer or PLC control, the two meter record has a leak alarm function, with a miniature printer;
計算機控制，可事先設定實驗壓力、升壓、保壓、卸壓等參數，系統根據指令進行自動調節，控制試驗過程，保壓過程不消耗能量，不產生噪音。并具有報表，實驗曲線等輸出功能。
Computer control, can be set in advance, the pressure boost, holding pressure, pressure and other parameters, the system is automatically adjusted according to the instructions, to control the test process, packing process does not consume energy, does not produce noise. And has the report, the experimental curve output function.
爆破試驗臺http://www.rizhaowx.com/
當前位置：
首頁 >>
公司動態 >>
行業資訊
發布時間：
2014-09-11
上一篇：
氣液增壓泵講解氣密性檢測儀檢測四要素
下一篇：
氣體質量氣密性檢測裝置流量計的優點有哪些？