爆破試驗臺施工工藝技術

爆破試驗臺的臺面平坦、潤滑,需求邊際切開規整,四邊平直,無顯著凹凸表象.貼面和封邊部件緊密、平坦,不允許有脫膠、鼓泡、洼陷、壓痕、外表劃傷、麻點、裂縫、崩角和刀口等. 爆破試驗臺:http://www.rizhaowx.com/

Blasting test flat surface, lubrication, neat demand marginal incision, four straight, no significant bump phenomenon. Veneer and sealing parts, a flat close, degumming, bubbling, sag, indentation, scratch, crack appearance, pitting, chipping and knife edge is not permitted.

各涂層均勻,鋼制或木制板外表平坦,五色差、無拼接、無顯著凹凸、無斑駁、無劃痕、無碰傷等殘損.切開、鉆孔和倒角無毛刺,外表的圓角、倒棱均勻共同.

The uniform coating, steel or wooden plate is flat, color difference, no splicing, no significant bump, no peeling, no scratches, no bumps and other damage. The incision, drilling and chamfering without burr, the appearance of the fillet, chamfer uniform.

柜體的每一塊,其四個邊有必要用優質熱熔膠經高溫高壓作防水封邊處置.

The body of each piece, the four side there is a need for high quality hot melt glue by high temperature high pressure waterproof sealing disposal.

柜體的板塊與板塊之間的銜接,選用優質三合一內預埋銜接件,在放置三合一銜接件的"L"形孔洞的兩頭有必要注滿黃膠,以增強握釘力,抗彎弧變形、防滲水、防搖晃.并一起運用滾花木質圓棒棰,帶膠安穩加固銜接.

Connection between the plate and the cabinet body, made of high quality three in one embedded within the connection pieces, placed in two three in one connector "L" shaped holes is necessary to fill the yellow glue, to enhance the nail holding ability, anti bending deformation, seepage of water, anti shake. And together with the knurled wood rod whip, adhesive and strengthening cohesion.

爆破試驗臺柜體的板塊與五金配件之間的銜接,在鞏固一切螺釘之前,有必要打一個小于螺釘直徑和長度的孔,高壓寫入膠水后,再行擰入螺釘,以增強握釘力,如為螺釘與螺母銜接可在外.

一切柜體銜接結實,無松動表象;外表平坦無顯著變形;顯露有些無毛刺及尖利鋒芒.

零部件無開裂或劈裂表象,不會呈現影響運用功用的磨損變形表象,可動有些(例如可調式地腳、活動隔板等)活動靈活,用手掀壓不會呈現永世形變形或松動,抗壓才能契合實驗臺的需求.

單相三線電源插座與兩線插頭相兼容.

一切水、電、氣路需求安全、適用,并隱藏式裝置.

爆破試驗臺產物尺度需求:長、寬、高差錯點≤3mm;鄰邊筆直度:臺面對角線、結構對角線1000mm≤3mm; 2000mm≤4mm; 3000mm≤5mm.

相關文章: 氣體增壓泵正確選擇考慮因素

---

當前位置： 首頁 >> 公司動態 >> 行業資訊 發布時間： 2014-09-20
上一篇： 氣體增壓泵安裝操作詳細說明 下一篇： 爆破試驗臺氣體匯流排常識