氣液增壓泵告訴您選擇天然氣增壓泵的因素

氣液增壓泵是我們公司主要產品之一,應用也是非常廣泛,為了答謝大家多年來對本產品的支持,氣液增壓泵分享一下關于選擇天然氣增壓泵的因素:

The gas-liquid booster pump is one of our main products, application is very extensive, in order to thank everyone for many years on the product support, gas-liquid booster pump share factors concerning the selection of natural gas booster pump:

工作壓力和流量.氣液增壓泵中的天然氣增壓泵和動力單元的工作壓力參照驅動氣壓為0.48Mpa時泵輸出壓力和流量.如果泵的最大輸出壓力大于所需的工作壓力,這就要考慮安全措施.

Working pressure and flow. The gas-liquid booster pump in the natural gas booster pump and a power unit of work pressure according to the driving pressure of 0.48Mpa pump output pressure and flow rate. If the maximum pump output pressure is greater than the required working pressure, it is necessary to consider the safety measures

氣液增壓泵可接受的體積和重量對于某些的應用,氣動增壓泵和動力單元的外形尺寸和重量也要重點考慮.根據客戶需實現的壓力和流量要求,我們可以按下面過程進行氣動增壓泵的選型.

The gas-liquid booster pump acceptable volume and weight for some applications, the pneumatic booster pump and a power unit dimensions and weight are also considered to be the focus. According to the pressure and flow rate required to achieve the requirements of customers, we can select the pneumatic booster pump according to the following procedure

輸送液體介質.氣體增壓泵輸送的液體介質是氣動增壓泵的選型中著重考慮的部分.液壓部分的材質和液壓密封圈是由輸送的液體介質所決定的.

The delivery of liquid medium. The liquid medium gas booster pump is considered in the selection of pneumatic booster pump parts. Material and hydraulic parts of the sealing ring is determined by the liquid medium conveying the

驅動氣體的壓力和流量.氣體增壓泵和動力單元在連續工作時使用的驅動氣壓不超過0.69Mpa

Pressure and flow driven gas. Driving pressure gas booster pump and a power unit used in continuous operation shall not exceed 0.69Mpa

更多關于天然氣增壓泵的知識，請咨詢氣液增壓泵公司

More about the natural gas booster pump knowledge, please consult the gas-liquid booster pump company

---

當前位置： 首頁 >> 公司動態 >> 行業資訊 發布時間： 2014-08-14
上一篇： 氣液增壓泵講解家用天然氣的安裝技巧 下一篇： 爆破試驗臺講解共軌噴油器試驗臺的安全注意