氣液增壓泵講解家用天然氣的安裝技巧
天然氣增壓泵給我們的生活帶來了很多便利,受到很多朋友的喜愛,為了大家更熟悉我們的產品,下面由氣液增壓泵和大家分享一下家用天然氣增壓泵的安裝技巧:
Natural gas booster pump has brought convenience to our life, has many friends, for everyone is more familiar with our products, following by gas-liquid booster pump installation tips and share of domestic natural gas booster pump:
為便于使用和維修,在泵進口管路上應安裝一個閥門.
For ease of use and repair, the pump inlet pipe should be installed a valve
電機線圈內裝有安全保護器,泵發生故障或抽不上水引起電機升溫超過規定值時,能自動斷路,待排除故障電機溫升下降后,能自動恢復運轉.
A motor coil equipped with safety protection device, pump failure or no water caused by motor temperature exceeds the specified value, can automatically open, for troubleshooting the motor temperature rise after declining, can automatically resume operation
氣液增壓泵告訴您泵安裝時務必按"安裝方式"顯示中的水平或垂直安裝,水流方向應與泵體上箭頭方向一致,并盡可能安裝在離水位最低位置.
The pump must be "installation" display in the horizontal or vertical installation, flow direction and the direction of the arrow on the pump body, and as far as possible from the lowest water level is installed in the position
管路連接應緊密,特別是進水管路不能漏氣否則將降低泵的揚程或抽不上水5.泵腔內未進水前,請勿長時間連轉,以免損壞密封件.
Pipe should be closely connected, especially water pipe can not leak or reduce the lift of pump or pumping water pump chamber without water is not 5, not a long time running, so as not to damage the seal
更多關于家用天然氣增壓泵的安裝技巧的知識,請咨詢氣液增壓泵http://www.rizhaowx.com 。
Installation techniques of domestic natural gas booster pump more knowledge, please consult the gas-liquid booster pump.
當前位置:
首頁 >>
公司動態 >>
行業資訊
發布時間:
2014-08-15
上一篇:
氣液增壓泵中單向閥的作用
下一篇:
氣液增壓泵告訴您選擇天然氣增壓泵的因素