氣體增壓泵故障分析

氣體增壓泵在使用過程中難免出現點問題,下面氣體增壓泵生產廠家將為您分享一下氣體增壓泵如果不能正常工作,有如下幾種可能.

Problem is the emergence of gas booster pump in use process, the gas booster pump manufacturers will provide you share gas booster pump if it does not work, there are several possible

1、驅動活塞密封伯磨損,導致活塞上側和下側串氣;

1, the drive piston seal "wear, causing the piston upper and lower side hernia;

2、控制閥損壞,導致換向閥不能正常工作;

2, control valve damage, lead to the valve does not work;

3、換向閥太臟,或它的密封件損壞,導致它不能動作;

3, reversing valve is too dirty, or the seal is damaged, leading to not move;

4、兩活塞連接處損壞,開口銷脫落,兩活塞桿錯位,導致活塞桿不能移動;

4, two piston joint damage, split off, two piston rod dislocation, causes the piston rod can not move;

5、增壓缸密封件漏氣.

5, a pressurizing cylinder seal leakage

在氣體增壓泵工作中有機會出現這種情況:需增壓氣體被斷開,卻開著增壓泵,增壓泵噪聲也很大.此進增壓泵工作頻率很高,壓力卻無法加上去,增壓泵噪聲也很大.長時間這樣工作,很容易損壞泵.同樣道理,當增壓泵出口壓力很低時,增壓泵工作頻率會很高,增壓泵也容易損壞

Have the opportunity to appear this kind of circumstance in gas booster pump work: pressurized gas is disconnected, but open the booster pump, booster pump noise is high. The booster pump working frequency is high, the pressure is not added, the booster pump noise is also great. Long time like this, it is easy to damage the pump the same way., when the pressure pump outlet pressure is very low, the booster pump working frequency will be high, a booster pump is easy to damage

本文有氣體增壓泵 http://www.rizhaowx.com整理編輯，轉載請附上網址

---

當前位置： 首頁 >> 公司動態 >> 行業資訊 發布時間： 2014-08-17
上一篇： 爆破試驗臺的系統特點 下一篇： 氣液增壓泵中單向閥的作用